Lumeno 861X replacement lens oval 110x150 mm for magnifying lamp with 3 or 5 dpt
Downloads & documentation:
| Data sheet | Not available |
| User manual | Not available |
Manufacturer & product safety
- Manufacturer
-
zalias GmbH
Ludwig-Rinn-Straße 14-16M
35452 Heuchelheim, Germany - Brand
- Lumeno
- info@lumeno.com
- Phone
- +49 641 984291-0
Dimensions: approx. 110 x 150 mm
The replacement lens is available with different magnifications:
- 3 diopters corresponds to a 1.75x magnification
- 5 diopters corresponds to a 2.25x magnification
Crystal clear real glass replacement magnifier without blue cast! Thus suitable for professional use.
For replacing scratched lenses in working lamps or also for converting to a different diopter strength when requirements change.
The oval lens (approx. 110 x 150 mm) is suitable for Lumeno magnifier lamps of the 861X series.
Frequently asked questions
Does this lens fit my lamp?
Matching works via series and diameter – both are in the product title (e.g. 152 mm for the 851X series). If in doubt, measure the diameter of your old lens or send our service team the model number from the type plate – they will name the right lens for you.
Read more in our guide: How long are spare parts available for my magnifying lamp?
Crystal clear or standard – what is the difference?
Standard glass lenses have a minimal green tint that usually goes unnoticed while working. The crystal-clear version is colour-neutral – the right choice when you need to judge colours, for example in cosmetics, print or electronics.
Read more in our guide: Crystal-clear or standard? The colour cast of the lens
Can I install a different dioptre strength than before?
The springs in the articulated arm are factory-tuned to the weight of the installed lens. Swapping for the same strength is straightforward; with a heavier or lighter lens the arm can lose its balance and needs readjusting.
Read more in our guide: Changing the lens: when it works and when it is better not to
Does it matter which way round I insert the lens?
No – the orientation of the lens plays no role during installation; top and bottom are equivalent.
Read more in our guide: Changing the lens: when it works and when it is better not to
How we check reviews
The reviews shown here are collected through our review service Judge.me. Every incoming review is automatically matched against the orders placed in our shop. Reviews that can be matched to an order are marked “Verified”; where no purchase could be established, that mark is absent. We carry out no further checks on individual reviews.