Replacement lens 152 mm – 3 or 5 dioptres, LED magnifying lamp

Lumeno 625X Ersatzlinse 152 mm mit 3 Dioptrien für Lupenleuchte 851X

Lumeno 625X Replacement Lens 152 mm for 851X Magnifying Lamp with 3 or 5 dioptres

Item number:6253

190,00 kr

Taxes included. Shipping calculated at checkout.

Shipping today if you order within .

Downloads & documentation:

Data sheet	Not available
User manual	Not available

Crystal-clear glass lens / 625X replacement lens for professional use with 3 or 5 dioptres

The Lumeno 625X replacement magnifier is a high-quality, crystal-clear genuine glass lens without a blue tint with a diameter of approx. 152 cm, specially developed to replace scratched or damaged lenses in magnifying lamps.

It can also be converted to a different dioptre value when requirements change. The choice of two different dioptre values provides the right magnification for many applications.

The lens is available in two magnifications:

3 dioptres (1.75× magnification)

Working distance: 33 cm
Ideal for reading, handicrafts, cosmetics
Advantage: Optimal compromise between magnification and working distance

5 dioptres (2.25× magnification)

Working distance: 20 cm
Ideal for electronics, nail design, jewellery making
Advantage: Optimal compromise between magnification and working distance

Fits all common magnifying lamps with a 152 mm lens, for example the Lumeno magnifying lamps of the 851X series.

The lens, convex on both sides and made of crystal-clear genuine glass, ensures a clear, low-distortion view without a blue tint. It is ideal for professional applications where colour fidelity, maximum image sharpness and reliability are required.

Please note that as the magnification increases, distortion also increases for technical reasons.

Frequently asked questions

Does this lens fit my lamp?

Matching works via series and diameter – both are in the product title (e.g. 152 mm for the 851X series). If in doubt, measure the diameter of your old lens or send our service team the model number from the type plate – they will name the right lens for you.

Does it matter which way round I insert the lens?

No – the orientation of the lens plays no role during installation; top and bottom are equivalent.

Can I install a different dioptre strength than before?

The springs in the articulated arm are factory-tuned to the weight of the installed lens. Swapping for the same strength is straightforward; with a heavier or lighter lens the arm can lose its balance and needs readjusting.

Crystal clear or standard – what is the difference?

Standard glass lenses have a minimal green tint that usually goes unnoticed while working. The crystal-clear version is colour-neutral – the right choice when you need to judge colours, for example in cosmetics, print or electronics.

Read more in our guide: Crystal-clear or standard? The colour cast of the lens

How do I clean the lens properly?

Use a soft, lint-free cloth – slightly dampened with mild glass cleaner for heavier soiling. Avoid abrasives and aggressive cleaners, as they can scratch the surface.

Read more in our guide: How do I clean the lens?

The lens reflects – is that normal and what helps?

Reflections on the lens are physically normal, especially with glossy objects and bright light sources behind you. Usually it already helps to swivel the lamp head slightly or change the angle between light, object and viewing direction – on dimmable models, also reduce the brightness a little.

Read more in our guide: Reflections on the lens: what is normal and what helps

Can the lens fall out?

Not in normal use - the lens sits in a frame that clicks in all the way round. When changing it, make sure the frame closes audibly, and lay the lamp down flat rather than working on it at the gooseneck. If the lamp is set up and taken down often, check the seating from time to time: a loose frame is the most common reason for a cracked lens.